Extended Cube

A cube with a lot of confusing parameters :-)

 

Object properties
Bottom Width	Width of the base polygon
Bottom Length	Length of the base polygon
Top Width Right	Distance between the center point and the right side of the top polygon.
Top Width Left	Distance between the center point and the left side of the top polygon.
Top Length Front	Distance between the center point and the front side of the top polygon.
Top Length Back	Distance between the center point and the back side of the top polygon.
Height Left	Height of the left side
Height Right	Height of the right side
Bottom Left Height	Height of two left bottom edges.
Textures
Front
Back
Left
Right
Top
Bottom
Inside front
Inside ...

Here are some illustrations describing every parameter. The 3d picture shows which side of the cube is shown in the left drawing. You can email me for further questions.
Top view Bottom side	I hope you understand 'Bottom width ' and 'Bottom length'. You can adjust the size of the lower polygon with them.
Top view Top side What you can do with the 'extended cube'...	You need to adjust 4 parameters to set the width and length of the upper polygon of the cube. If you want the upper and lower polygon to have the same width, you'll need to set the 'Top width left' and the 'Top width right' value to half the Bottom width value. Here's an example: Bottom Width = 20 Top Width Left = 10 Top Width Right = 10 If you add the Top width left and  Top width right value up it will be the same as the Bottom width value :-)
South view	I hope you'll understand this with these pictures. Otherwise you can email me.

Back to objects.

Further topics:
- Orientation of objects.