You should use a
smaller scale factor. Go to menu Project >
Scale... Recommended scales
| fixed scale |
| scale |
usage |
smallest unit |
| 0.25 |
big buildings or buildings with a
low detail level |
250.0 mm |
| 0.125 |
normal buildings, detailed other
objects |
125.0 mm |
| 0.0625 |
very detailed objects (for
smaller things) |
62.5 mm |
| variable scale |
| scale |
usage |
smallest unit |
| 1.00 |
big objects with very low detail
level |
1000 mm |
| 0.10 |
detailed objects like buildings
smaller objects |
100 mm |
| 0.01 |
very detailed objects (for
smaller things) |
10 mm |
If you've already started with a project then it is
difficult to change your scale factor. You can try it to use the 'scale
up' feature but it you need to go over your project an check if every
object is still in place and not slightly overlapping with another
object.
menu Project > Scale up all objects...
Read the corresponding help file: Help
|
